get_timing_paths # Create a collection of timing paths
[-to to_list] (To pins, ports, nets, or clocks)
[-rise_to rise_to_list]
(Rising to pins, ports, nets, or clocks)
[-fall_to fall_to_list]
(Falling to pins, ports, nets, or clocks)
[-from from_list] (From pins, ports, nets, or clocks)
[-rise_from rise_from_list]
(Rising from pins, ports, nets, or clocks)
[-fall_from fall_from_list]
(Falling from pins, ports, nets, or clocks)
[-through through_list]
(Through pins, ports, nets, or cells)
[-rise_through rise_through_list]
(Rising through pins, ports, nets, or cells)
[-fall_through fall_through_list]
(Falling through pins, ports, nets, or cells)
[-exclude exclude_list]
(Exclude pins, ports, nets or cells)
[-rise_exclude rise_exclude_list]
(Exclude rising of pins, ports, nets or cells)
[-fall_exclude fall_exclude_list]
(Exclude falling of pins, ports, nets or cells)
[-delay_type delay_type]
(Type of path delay:
Values: max, min, min_max, max_rise,
max_fall, min_rise, min_fall)
[-nworst paths_per_endpoint]
(List N worst paths to endpoint:
Value >= 1)
[-max_paths count] (Maximum number of paths per path group to output:
Value >= 1)
[-group group_name] (Limit report to paths in these groups)
[-unique_pins] (Find paths through unique pins)
[-slack_greater_than slack_limit]
(Display paths with slack greater than this)
[-slack_lesser_than slack_limit]
(Display paths with slack less than this)
[-ignore_register_feedback feedback_slack_cutoff]
(Ignore feedback loops to registers)
[-include_hierarchical_pins]
(Create timing point for each hierarchical pin in path)
[-trace_latch_borrow] (Trace timing paths through borrowing latches)
[-trace_latch_forward] (Trace timing paths beyond latch loop breakers)
[-pba_mode values_list]
(Path-Based Analysis mode:
Values: none, path, exhaustive,
ml_exhaustive)
[-start_end_type from_to_type]
(Subset of paths to return:
Values: reg_to_reg, reg_to_out, in_to_reg,
in_to_out)
[-domain_crossing string]
(Separate cross domain paths (default is all):
Values: all, only_crossing, exclude_crossing)
[-normalized_slack] (Sort by normalized slack)
[-start_end_pair] (List worst path per start-endpoint pair)
[-cover_design] (List worst path through every violating pin)
[-cover_through through_list]
(Through pins, ports, nets, or cells)
[-dont_merge_duplicates]
(Do not merge paths that appear in more than one scenario)
[-tag_paths_filtered_by_pba tag name]
(Tag GBA paths filtered out in PBA analysis)
[-dominant_exception <false_path|multicycle_path|min_max_delay|path_margin>]
(dominant_exception)
[-sms_scenarios SMS Scenarios]
(Select paths for specific SMS scenarios)
[-pre_commands pre_command string]
(Pre merged reporting commands to be executed at worker(s))
[-post_commands post command string]
(Post merged reporting commands to be executed at worker(s))
[-pocv_pruning] (Filter out any path which does not contribute to high sigma failure rate)
[-vdd_slack_lesser_than vdd_slack_limit]
(Perform Voltage slack analysis on all paths with up to this)
[-vdd_slack_greater_than vdd_slack_down_limit]
(Perform Voltage slack analysis on all paths with down to this)
[-reference_pin reference_pin_list]
(Reference list of pins or ports)
[-path_type format] (Format for path report:
Values: full_clock_expanded)
[-attributes attributes]
(Attributes to be returned to the master)
[-voltage_sweep list] (Enable Voltage slack analysis with voltage sweep)
[path_collection] (a collection of timing paths)